Engine Restoration (Component 2: Neutralizer)

Armor Lubricants

Description

A chemical reaction neutralizer that liquefies the foam cleaner and connects the dissolved residue. With Carbon X Extractor, the residual emulsion and the dissolved particles can be safely eliminated from the combustion chamber with this product.


Area of Applications

This product is applicable for Petrol and Diesel Engines.


Consumption

500ml for 4 to 8 cylinder (depending on the capacity of the cylinder) or 2 to 4 EGR valves, turbocharges, or intake system.

Reaction Time

15 to 20 minutes

Features

  • Extremely efficient lubrication additives (extreme pressure additives) that provide incredibly high stability, this product protects the engines against excessive friction when starting, preventing damage of mechanical components.
  • The seals are secured effectively.

Applications

Combustion Chamber
After using the cleaning foam, insert the probe of the neutralizer on the same access port and allow to react until the cleaner is dissolved. (approximately 4-5 minutes). Spray multiple times if required. Use a Carbon X Extractor to extract the resulting emulsion. For heavy soiling, process must be repeated.

After cleaning is complete and the dissembled components are placed (Injector or spark plug), allow the engine to run at idle empty for 2 to 3 times for approx. 10 seconds through the starter to extract the residual amounts. We suggest covering the openings(injectors or spark plug) with a cleaning paper that will absorb residual amounts and protect the engine compartment from contamination.
The cleaning effects can be tested with an available endoscope camera.
EGR, Turbocharges, and intake manifold:
The application depends on the accessibility and can be performed in the mounted and dissembled state.
Open the intake manifold between the throttle valve and the air intake filter box, or disconnect the inlet and outlet lines from the turbocharges or the EGR valve. Spray all areas with the foam cleaner. When the foam passes through all access openings, stop spraying and allow to react for 15 to 20 minutes approx.

A test run if at least 20 minutes is necessary after assembly of the parts.

NOTE: This is a highly specialized application requiring profound expertise!
We recommend the application in dismantled state. The throttle valve must be open to clean the intake tract.
Then, clean the combustion chamber.
After usage, the channels must be monitored and cleaned if needed.


Our Packaging Sizes

Packing Size

150ml 200ml
300ml 400ml 500ml

Packing Size

150ml 200ml
300ml 400ml 500ml

Packing Size

150ml 200ml
300ml 400ml 500ml

Packing Size

150ml 200ml
300ml 400ml 500ml

Packing Size

150ml 200ml
300ml 400ml 500ml

COPYRIGHT © 2020 BY Armor Lubricants | ALL RIGHTS RESERVED.
Close Bitnami banner
Bitnami