fbpx
×
Generic filters
Exact matches only
Search in title
Search in content
Search in excerpt
×

Contact Us





    Understanding the Most Important Properties of Marine Engine Oil

    Featured Art

    Marine Engine Oil Properties

    All lubricants help to reduce friction and heat, prevent damage, and prolong component life. However, not all oils are capable of operating in potentially caustic environments, such as those found in coastal areas or on the sea. Marine Engine Oil have very important properties that make them ideally suited for use in boat motors, aboard ship, and in other marine-related areas. In this post, we will explore some of the most important of those properties.

    Marine Lubricants uses

    Why Is Marine Engine Oil Different?

    Before we touch on the particular properties of marine engine oil, we need to address the question of why marine engine lubrication differs from lubricating engines used in non-marine applications. There are actually several different reasons, including the following:

    • Size – Often, marine engines are much larger than their land-bound relatives, particularly on larger ships.
    • High Efficiencies – Marine engines must be very efficient in order to produce ample motive power, which requires high firing pressures.
    • Fuel – Most marine engines use diesel fuel, but not high-quality diesel. High sulfur content and carbon residue create major problems.

    Now that we’ve looked at some of the differences between marine and land-based engines, we can turn our attention to marine lube oil properties.


    Marine Engine

    Alkalinity

    One of the most important considerations with marine engine oil is the alkalinity. This is particularly the case with four-stroke and trunk piston engines, where the oil lubricates the pistons and the liner, coming in contact with combustible fuel. Alkalinity helps to control acidic corrosion in these situations. Two-stroke marine engines require a different grade of 2 stroke Outboard Oil TC-W3

    marine trunk piston

    Resistance to Oxidation

    Because marine lubricant is always exposed to oxygen when in the engine, it must be able to resist oxidation well. Add to this the fact that most engines do not have the oil changed regularly, but rather, it is topped up as necessary until it is sufficiently contaminated to warrant the cost and time investment of a full change. High temperature operation increases the oxidation rate of marine engine oil. A quality marine engine oil will have additives to help prevent oxidation and oxidative damage.

    Resistance to Oxidation

    Detergent Capabilities

    Detergent oils help to scour the internal components of the engine, removing buildup and reducing wear and tear.

    Dispersant Capability

    Combined with detergent capabilities, marine lubricants must also be able to disperse contaminants properly. In an ideal situation, Marine oil should be able to keep impurities and contaminants suspended at the surface, rather than allowing them to mix with the oil itself.

    Low Volatility

    All oil is combustible, but high volatility lubricants are very dangerous, particularly aboard a ship. Marine lubricants must have low volatility to increase the oil’s flash point to a sufficiently high temperature that it does not pose a threat of crankcase explosion.

    Conclusion

    These are some of the more important properties of marine engine oil. However, there are many others. For instance, marine lube oil should have a good ability to adhere to surfaces (oiliness or “stickability”). Viscosity, thermal conductivity, demulsification, and load carrying capacity are also all important.



    WhatsApp
    +971 52 977 6000